Adc SG-1 Bedienungsanleitung PDF herunterladen (Seite 28)

Chapter 3: Command-Line Interface (CLI) June 30, 2006

3-2 SG1-UM-8500-03

COMMANDS AND NAVIGATION

Navigate the command-line interface by entering a command name or a command string to move to the appropriate

command level. The command level is indicated by the prompt. You can abbreviate command-line interface

commands if the abbreviations are distinct; however, you must use at least two letters of the command. Also, the

commands are not case sensitive. The following general and navigation commands are available from each prompt

(see Table 3-2 below and Table 3-3 on page 3-3, respectively).

Table 3-2. General Commands

Command Path Navigation

For each command that provides configuration or management of a SG-1 system, a path is provided in the

applicable section of the user document to help locate that command in the command-line interface structure. The

path will be displayed in a box before the description of the command.

Debug Use the commands in this first level menu to display system parameters

such as:

• Memory allocation

• Network/tunnel connections

• Sonet clock source

Configuration-Debug Use the commands in this third level menu to configure system debug

messages such as:

• Error and event level

• Time server IP address

• Log server IP address

Enter the following command: To:

? Display a list of commands available from the

current prompt.

command name? (for example, show?) Display an explanation of a particular command.

Exit Leave the current level and return to the

upper level.

Menu Types of Commands

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 225 226

Keine Kommentare

Adc SG-1 Bedienungsanleitung Seite 28