Adc SG-1 Bedienungsanleitung PDF herunterladen (Seite 141)

June 30, 2006 Chapter 7: Second Level Commands

SG1-UM-8500-03 7-61

Usage

no ip ospf interface <Ethernet | VLAN | ATM> <slot number>\<port number>

[\<sub-interface>] authentication-key

For parameters and examples, refer to “Using the ip ospf interface authentication-key command”.

Using the ip ospf interface message-digest-key command

This command configures the OSPF MD5 (Message Digest 5) authentication parameters.

Usage

ip ospf interface <Ethernet | VLAN | ATM> <slot number>\<port number>

[\<sub-interface>] message-digest-key <keyid> md5 <key>

Parameter(s)

<keyid>

This is the MD5 identifier to be used by neighboring OSPF routers.

<key>

This is the MD5 password (1 to 16 alphanumeric characters).

For additional parameters, refer to “Using the ip igmp proxy command” on page 7-51.

Example(s)

Using the no ip ospf interface message-digest-key command

This command removes the OSPF MD5 (Message Digest 5) authentication parameters.

Usage

no ip ospf interface <Ethernet | VLAN | ATM> <slot number>\<port number>

[\<sub-interface>] message-digest-key

For parameters and examples, refer to “Using the ip ospf interface message-digest-key command” on page 7-61.

Host(config)# no ip ospf interface ... message-digest-key

Host(config)# ip ospf interface Ethernet 1 \ 2 message-digest-key 25 md5 jkljlll

Host(config)# no ip ospf interface ... message-digest-key

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 225 226

Keine Kommentare

Adc SG-1 Bedienungsanleitung Seite 141