Adc SG-1 Bedienungsanleitung PDF herunterladen (Seite 107)

June 30, 2006 Chapter 7: Second Level Commands

SG1-UM-8500-03 7-27

Parameter(s)

This is the allowed network source IP; it must be a legal network IP address.

This is the allowed network source mask; it must be a legal network IP address.

Example(s)

Using the no access-list native-ip command

This command deletes the native IP access list configuration. It deletes the static native-ip access list configuration.

Usage

no access-list native-ip <source ip address>

Parameter(s)

This is the allowed network source IP; it must be a legal network IP address.

Example(s)

Using the access-list native-ip-pass-through command

The access-list native-ip-pass-through command defines the source IP addresses arrived from a native-ip pipe

that should not pass through the standard native ip path. Those IP addresses should not be considered as arriving

from a native-ip pipe. This access-list is precedent to the native-ip access-list. The maximum number of access list

line is 200.

Usage

access-list native-ip-pass-through <source ip address> <source mask>

Parameter(s)

This is the allowed network source IP; it must be a legal network IP address.

This is the allowed network source mask; it must be a legal network IP address.

Host(config)# access-list native-ip 192.168.1.0 255.255.255.0

Host(congfig)# no access-list native-ip

Host(config)# no access-list native-ip 192.168.1.0

Host(congfig)# access-list native-ip-pass-through

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 225 226

Keine Kommentare

Adc SG-1 Bedienungsanleitung Seite 107