ADC MM701F Bedienungsanleitung PDF herunterladen (Seite 57)

Chapter 4: Managing the Modem Using the Console Port & Telnet

MM701F User Manual 51

5 Type 9 to enter the DNS address that is provided to the requesting DHCP client—only if

you are operating in server mode. This IP Address is also available from your LAN

administrator.

6 Type

10 to select Apply. Apply immediately activates the changes that you have made for this

session.

7 From the Main Menu, select Save New System Configuration to save these settings or the

changes will be lost upon reboot or power cycle.

8 If you have enabled DHCP, select Reboot from Main Menu to reboot the router.

SettingUpNAT

This procedure is optional. Follow this procedure to enable or disable NAT for a WAN session.

From the

Main Menu, select WAN Setup to access the WAN Sessions page.

1 Select the session for which you wish to enable NAT. The

WAN Sessions Options screen

displays.

2 From the WAN Sessions Options screen, select the NAT option and type 1 or 2 to either disable

or enable (respectively) NAT.

3 From the

Main Menu,type10 to select Apply. Apply immediately activates the changes that

you have made for this session.

4 From the

Main Menu, type 5 to select Save New System Configuration and save these settings.

Otherwise, the changes will be lost upon reboot or power cycle.

Session State

1. Disable

2. Enable

Select session NAT (Return to exit) ->

• If DHCP Client is selected, you do not need to configure an IP address.

• In Bridge mode, you need an IP address for the LAN port to use a Browser

or Telnet to manage the MM701F.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 93 94

Keine Kommentare

ADC MM701F Bedienungsanleitung Seite 57