ADC 100 Bedienungsanleitung PDF herunterladen (Seite 12)

pico ADC-100 user manual

Version 1.0 rev 3 Page 9

The channel name will appear on parameter menus. The two lines of

heading will appear in the headings of tabulation reports.

The voltage range is the input voltage range for the ADC channel.

The measurement mode can be one of ADC counts, Volts, AC volts, DC

volts, frequency or dB. ADC counts and Volts are instantaneous

measures: the others are based on a number of measurements

dependent on the minumum frequency.

The min frequency specifies the number of measurements to be taken

for AC and DC volts, frequency and dB measurements. The lower the

minimum frequency, the longer the time for each sample.

The number of readings specifies how many readings will be taken for

this channel for each sample. The combination method defines how the

readings will be combined to form a sample. It can be minimum,

maximum or average. Average is useful to reduce the effects of noise:

Minimum and Maximum can be used to identify extreme values during the

sample interval.

The total measurement time is the total time to collect all the readings for

this sample: it must be less than the sample interval.

pico ADC-100 user manual

Page 10 Version 1.0 rev 3

1 2 ... 7 8 9 10 11 12 13 14

Keine Kommentare

ADC 100 Bedienungsanleitung Seite 12