ADC 410F Betriebsanleitung PDF herunterladen (Seite 28)

4/9

Fct. Text Description and settings

3.03 ZERO SET Zero calibration

Note:

Carry out only at “0” flow and with completely filled

measuring tube!

Precautionar

y query

• CALIB. NO

Press

↵

key to return to Fct. 3.03 “ZERO SET”.

• CALIB. YES Press ↵

key to start calibration.

Duration approx. 25 seconds, current flowrate

displayed in the selected unit (see Fct. 1.04 “DISP. FLOW”).

A “WARNING” sign appears when flowrate “>

“;

acknowledge by pressing

↵

key.

• STORE NO (do not store new zero value)

• STORE YES (store new zero value)

Press

↵

key to return to Fct. 3.03 “ZERO SET”.

3.04 ENTRY CODE Entry code required to enter setting mode?

• NO (= entry with → only)

• YES (= entry with → and Code 1: → → → ↵ ↵ ↵ ↑ ↑ ↑ )

Press

↵

to return to Fct. 3.04 “ENTRY CODE”.

3.05 USER UNIT Set any required unit for flowrate and counting

→ TEXT VOL. Set text for required flowrate unit (max. 5 characters)

Factory-set: “Liter” or “MGal”.

Characters assi

gnable to each place:

• A-Z, a-z, 0-9, or “ – “ (= blank character).

Press

↵

key to transfer to subfunction “FACT. VOL.”

→ FACT. VOL. Set conversion factor (F

) for volume

Factory set “1.00000” for “Liter” or “2.64172E-4” for “US MGal”

(exponent notation, here: 1

or 2.64172

-4

Factor F

= volume per 1m

Setting range • 1.00000 E-9 to 9.99999 E+9 (= 10

-9

to 10

)

Press

↵

key to transfer to subfunction “TEXT TIME”.

→ TEXT TIME Set text for required time unit (max. 3 characters)

Factory-set: “hr” or “day”:

Characters assignable to each place:

• A-Z, a-z, 0-9, or “ – “ (= blank character).

Press

↵ key to transfer to subfunction “FACT. TIME”

→ FACT. TIME Set conversion factor (F

) for time

Factory-set: “3.60000 E+3” for “hour” or “8.64000 E+4” for “day”

(exponent notation, here: 3.6

or 8.64

-4

Set factor F

in seconds.

Setting range

• 1.00000 E-9 to 9.99999 E+9 (= 10

-9

to 10

)

Press

↵

key to return to Fct. 3.05 “USER UNIT”.

3.06 APPLICAT. Set overload point for A/D converter

→ FLOW • STEADY (150% of Q

100%

) • PULSATING (1000% of Q

100%

)

Press key

↵

to return to

Fct. 3.06 “APPLICAT.“,

with installed option

“empty pipe“

change to subfunction

“EMPTY PIPE“.

→ EMPTY PIPE Switch on “empty pipe” identifier option?

(appears only when this option is installed)

• YES • NO

Select with key

↑

Press

↵

key to return to

Fct. 3.06 “APPLICAT.“.

3.07 HARDWARE Assign outputs and inputs to terminals B1 and B2

→ TERM.B1 Terminal B1

• PULSOUTP. • STATUSOUTP. • CONTROLINP.

Select with key

↑

Press key

↵

to transfer to subfunction

“TERM. B2”.

→ TERM.B2 Terminal B2

• STATUSOUTP. • CONTROLINP.

Select with key

↑

Press key

↵

to return to

Fct. 3.07 “HARDWARE”.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare

ADC 410F Betriebsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADC 410F