ADC Cuda 12000 Technical Information PDF herunterladen (Seite 185)

100

101

Cuda 12000 IP Access Switch CLI Reference Guide

interface 181

interface

Use this command to enter interface configuration mode for a specific interface:

■ Ethernet

■ Cable

■ POS

■ Bridge-Group

■ Loopback

Mode

Any.

Syntax

interface {<chassis>/<slot>/<interface> | loopback}

Arguments

{<chassis>/<slot>/<interface> |

loopback}

Specifies one of the following values:

■ <chassis>/<slot>/<interface> – Specifies the combination of

chassis number, slot number, and interface number (port

number) that identifies the Ethernet, cable, POS, or

bridge-group interface you want to configure. The chassis

number can range from 1 to 128, though currently it can

only be 1. The slot number can range from 1 to 12. The

range of interface numbers depends on the number of

ports on the card.

■ loopback – Specifies the loopback interface, to enter

loopback mode. You can then manage this interface as you

would any other IP interface.

Note that this loopback interface differs from the standard

IP loopback interface (127.0.0.1). One of the uses of this

loopback interface is for opening in-band connections (such

as telnet sessions) to the Cuda 12000. Users can specify the

IP address of the loopback interface to open connections,

thereby eliminating the need to specify the IP address of a

physical interface (such as a CMTS interface).

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 651 652

ADC Cuda 12000 Technical Information Seite 185

Kommentare zu diesen Handbüchern

ADC Cuda 12000 Technical Information Seite 185

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Netzwerk-Switches ADC Cuda 12000