Adc Release 3.1 Bedienungsanleitung PDF herunterladen (Seite 55)

100

101

ADCP-70-220 •Issue 1 • November 2000 • Section 2 Operation and Maintenance

Page 2-25

NTP-010

Page 1 of 1

DELETE A CELLWORX STN NODE

Summary: This procedure outlines the steps involved to remove a Cellworx STN ring node from

an in-service ring network, or an expansion shelf from an in-service condition. This procedure

enables the network administer to change the network configuration when required. It may be

necessary to remove a ring NE via software if the network is being uninstalled, or the equipment

at a site is being moved to a new location, etc. Before removing a node from the network, all

VP/VC connections to that node must be deleted.

DELETE A RING NODE FROM AN IN-SERVICE RING SYSTEM

1. Launch the Cellworx Vision Graphical User Interface (GUI). DLP-705

2. Delete any VP/VC connections that are terminated at the node

being removed from service. DLP-739

3. Delete the node via the GUI using one of the following

procedures according to the type of node being removed:

• Delete a Cellworx STN node. DLP-740

• Delete a Cellworx STN EPS shelf. DLP-746

Stop! You have completed this procedure.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 488 489

Kommentare zu diesen Handbüchern

Keine Kommentare

Adc Release 3.1 Bedienungsanleitung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Adc Release 3.1